1. Question: After pressing the reset button, the device shows no response
Answer: Check if the driver is reporting an error
Check if there are any objects blocking the front and rear safety shooting switches
Replace the safety shooting switch
Check if the motherboard has expired (C card)
2. Question: After pressing the reset button, the touch screen displays an error message indicating that the X/Y/Z/W axis has returned to its original position
Answer: Check if the sensor is functioning properly
Check if there is an input signal on the motherboard
3. Question: After pressing the reset button, the machine slowly moves in the opposite direction
After pressing the reset button, the machine keeps moving in the positive direction but does not stop
Answer: Check if the sensor is damaged
Check if the sensor wire is damaged
Check if the sensor voltage is normal
Check if it touches
Replace the motherboard
4. Question: After pressing the reset button, only the coordinates change on the software or touch screen without any action from the machine
Answer: Check if the driver is reporting an error
Check if the W-axis coupling is loose
Check if the belt is broken or loose
